Quick answer
Check the spin setting, load balance and door closure first. If water remains in the drum, drainage may be preventing the spin cycle. Stop if there is a leak, burning smell or severe shaking, and never bypass the door lock.

Checks vary by model. Follow your appliance’s owner’s manual; this guide does not replace a diagnosis.
Check these things before calling
1. Confirm the cycle and spin setting
Some cycles use a slower spin, and a no-spin option can leave clothes wetter than expected. Check the selected program against your owner’s manual and fabric-care labels. If the machine is simply paused, follow its normal resume instructions rather than repeatedly disconnecting power.
2. Redistribute the load
A single heavy item or tangled bedding can collect on one side of the drum. Pause the machine and wait for it to stop and unlock normally. Redistribute the items and reduce an overloaded load, following the model’s capacity guidance. Do not reach into a moving drum.
An unbalanced load can cause slow spinning, a stopped cycle or very wet clothes. Samsung’s spin-performance guide explains how load distribution and cycle choice affect the result.
3. Check the door or lid
Make sure clothing is not trapped in the opening and the door or lid closes normally. Do not slam it, force a locked door open or bypass a safety switch. Note a lock-related message exactly as displayed; code meanings differ by manufacturer and model.
4. Look for standing water
A drainage problem can prevent the spin stage. Look through the door or into the tub only when it is safe to open. Visually check an accessible drain hose for a kink without moving a heavy machine or disconnecting plumbing.
If your manual describes a user-accessible pump filter, follow that exact procedure. Switch off and unplug the washer, allow hot water to cool and prepare for controlled drainage before opening anything. Not every washer has an owner-serviceable filter. If you cannot drain it safely, leave it closed and request service. LG’s drain-and-spin guidance explains the relationship between drainage and spinning.
5. Note movement, suds and error messages
Record whether the washer shakes, stops at the same point or displays a code. Check detergent type and amount against your manual, especially if there are excessive suds. Do not keep restarting a machine that bangs violently or moves across the floor. These observations are more helpful to a repair technician than a guess about which part has failed.
When to stop troubleshooting
Stop using the washer if it leaks, smells burnt, repeatedly trips a breaker or makes severe grinding or banging noises. If water is near a plug or outlet, do not touch the plug or stand in water to disconnect it. Seek professional assistance.
Do not open electrical panels or attempt to bypass a door lock. If a normal, appropriately sized load still will not spin after the safe checks, the machine needs diagnosis. A motor, lock, pump or control fault cannot be confirmed from wet clothes alone.
What to tell the repair team
- Your city and ZIP code, plus the washer’s brand and model.
- Whether it is a front-load or top-load washer.
- Whether water remains in the drum or it drains but will not spin.
- The exact error message and any unusual sound or movement.
- Which cycle was selected and what you have already checked.
Call Dr Appliance Repair Pro at (888) 284-4050 to discuss washer repair. Check service in your city and ask about availability, diagnostic fees and the next steps for scheduling. Keep the model number handy so the conversation can focus on your appliance.
Common questions
Why are clothes soaking wet after the wash?
A reduced or skipped spin, an unbalanced load or incomplete drainage may be involved. Start by checking the selected cycle and whether water remains in the drum.
Should I run another spin cycle?
If there are no leaks, unusual smells or violent movement, follow the manual’s instructions after correcting the load or settings. If the problem repeats, stop retrying and arrange a diagnosis.
Does a washer that will not spin need replacing?
Not necessarily. Ask for a diagnosis and repair estimate first. Compare the repair cost, the machine’s age and condition, and any remaining manufacturer warranty before deciding.
